Pipe Freeze Protection

In cold locations, thermal insulation alone cannot keep water pipes from freezing. A pipe freeze protection system can prevent freezing of fluids in pipes such as general water piping and fire sprinkler piping.

Pipe Freeze Protection Heat Trace System

Pipe-Freeze-Protection-Commercial.jpg nVent Thermal Management uses electric heat trace cables to keep non-flowing water in pipes, pumps and associated equipment from freezing.  The electric heat trace cables are engineered to replace the heat lost through the thermal insulation.

nVent Thermal Management offers two heat trace cable systems for commercial pipe freeze protection—nVent RAYCHEM XL-Trace for sophisticated applications and RAYCHEM WinterGard for less critical applications.

Both heat trace cable systems utilize self-regulating technology to provide heat where it is needed without worry of overheating. This is particularly important in temperature critical applications such as fire sprinkler systems or plastic pipes.

RAYCHEM XL-Trace

RAYCHEM XL-Trace is a complete heat trace system that provides pipe freeze protection of metal and plastic pipes, above ground or buried.

  • It is best suited for sophisticated applications that require longer circuit lengths, higher power output, and advanced control systems
  • It includes heat trace cable, connection kits, power distribution panels, and sophisticated electronic controllers
  • It is covered with a 10-year warranty
  • Applications include cooling towers, parking garages, coolers, freezers and fire sprinkler heads
  • It is the only heating cable system approved for use on fire suppression systems, including sprinkler pipes, including supply pipes, standpipes, and branch lines
  • It includes an on-line design tool— XL-ERATE , that can assist you in selecting the correct heating cable and control system to suit your application requirements
Brand Max Circuit Length (ft) Heating Cable Output (W/ft) Outer Jacket Connection Kits Pipe Sizes Limited Warranty Rated
RAYCHEM XL-Trace Up to    530 ft 5, 8 or 12 Braid and outer jacket (Polyolefin or Fluoropolymer) RayClic or FTC connections. Up to 20 inches. 10 Years 120 V, 208-277 V

When frozen water pipes break, it can lead to costly repairs from plumbing cost to water damage and other potential safety issues.

Reliable, Efficient Pipe Freeze Protection

Pipe-Freeze-Protection-Commercial.jpg

nVent RAYCHEM pipe freeze protection systems are engineered to keep your pipes from freezing.

RAYCHEM XL-Trace and RAYCHEM WinterGard heat trace cables are based on proven self-regulating technology that has provided years of worry free performance.

nVent Thermal Management is the world leader in heat tracing solutions. We have sold over one billion feet of RAYCHEM self-regulating heat trace cable and are known for technical leadership and expertise in polymer science and radiation cross-linking.  And, we offer the most advanced line of heat-trace control and monitoring systems. The Proportional Ambient Sensing Control (PASC) feature, built into the RAYCHEM controllers, can result in savings of up to 30% of the energy used by conventional ambient control systems.

Simpler Design, Lower Costs
Energy Savings

Today’s energy conscious environment encourages that every application is provided with an energy efficient system.  nVent Thermal Management’ pipe freeze protection system with RAYCHEM self-regulating heat trace cables and proportional controllers provides only the heat you need, saving energy over conventional constant wattage systems.  The RAYCHEM ACS-30 control system monitors the energy of each heating cable circuit to optimize energy usage.

RAYCHEM XL-Trace is Great for Sprinkler Systems

NFPA-13 allows use of electrical heat tracing to freeze protect fire sprinkler systems.

RAYCHEM XL-Trace provides many advantages over dry or glycol fire sprinkler systems:

  • Simpler design without the need for dry actuator control or glycol filled systems for freezing areas.
  • Simpler retrofit or building expansion designs without worries about water delivery times.
  • Longer sprinkler pipe life compared to dry systems.  Dry systems have moisture trapped in the pipes after testing, leading to increased internal pipe corrosion, shortening the life of the pipe.
  • Lower cost piping compared to galvanized pipe recommended for dry systems.
Self-Regulating Technology

nVent RAYCHEM self-regulating electric heat trace cables automatically adjust their power output to compensate for temperature changes. Heat is generated as electric current passes through the conductive polymer core between the conductors. As the temperature drops, the number of electrical paths through the core increases and more heat is produced. Conversely, as the temperature rises, the core has fewer electrical paths and less heat is produced.

RAYCHEM XL-Trace and RAYCHEM WinterGard self-regulating heat trace cables:

Self regulating

  • Can be used for metal or plastic pipes
  • Have a cross-linked, conductive polymer core forming a parallel circuit
  • Can be cut  to length, spliced or repaired on site
  • Offer different power output levels to suit the needs of each application
  • Are protected by a tinned-copper braid and are available with a durable outer jacket to withstand mechanical abuse during installation

Advanced Control Systems

nVent Thermal Management offers two advanced control systems and a basic thermostat controller for freeze pipe freeze protection systems: The RAYCHEM C910 and RAYCHEM ACCS-30 controllers are specifically designed for use with RAYCHEM XL-Trace cables; whereas the RAYCHEM AMC-F5 controller is best suited for RAYCHEM WinterGard cables.


RAYCHEM C910:
  • Is ideal for smaller buildings with critical piping  systems that require monitoring
  • Can control a single heating cable circuit

RAYCHEM ACCS-30:
  • Is ideal for large freeze protection systems or multiple heat-tracing applications
  • Can control up to 260 heating cable circuits from a single user interface for site wide monitoring

Both controllers provide:

  • Multiple temperature inputs
  • Ground-fault protection
  • Monitoring
  • Alarm contacts
  • Building Management System (BMS) integration
  • Line sensing, ambient or Proportional Ambient Sensing Control (PASC) to optimize the energy savings for your specific needs.

Note: PASC regulates the power of the heating cable system to the real-time ambient temperature, saving up to 30% of the energy over conventional ambient control systems


RAYCHEM AMC-F5:
  • Is a basic thermostat for the RAYCHEM WinterGard system
  • It has a fixed set point of 40°F (4°C)
  • It can be used for ambient-sensing or line-sensing
  • It can be used to control a single heat tracing circuit, or as a pilot control of a contactor switching multiple heat tracing circuits

Related Products

Connection and Protection